Samsung Training Practice Test

These questions are part of the practice quiz. Start practicing

• How many screws are in the Galaxy S10+ Rear assembly?
• The Sub PBA in S9/S9+ is connected to the Main PBA via a Flex Cable.
• When heating a Galaxy Note 8 prior to Back Glass removal with SOC < 68% using a Hot plate, how long and at what temperature should it be heated?
• What is the string code used to enter Audio Loopback Test?
• When tightening multiple screws during assembly, which pattern is recommended?
• Which device has the most screws in its rear case among the listed devices?
• Which device requires 1 screw to remove the headphone jack?
• Which device is described in the material as having a Rear Assembly consisting of two pieces?
• For back glass removal on Note 8, heating at 60 C for 10 minutes is used when SOC is above 68%.
• What is the correct pressing duration for GS7 Flat rear glass replacement?
• How many screws on the rear case of the GS8?
• Which model’s rear case uses 20 screws?
• Which action is described for pressing the Galaxy S10 family devices after assembly?
• How many screws are in the S6 flat rear case?
• Which device uses an AOD jig for back glass disassembly?
• Which device is associated with an OCTA that has two connectors?
• Which action is NOT a recommended use for the Disassembly Stick?
• When pressing only the battery what part is left off the device?
• Which statement best describes the Bottom Piece in the GS8 rear case assembly?
• On the Galaxy GS8, which part of the Rear Case should be assembled first?
• Which part should be checked when 'Auto Rotation' is enabled but not working?
• Which string will display a device's internal IMEI?
• The home key can be removed on the GS6 Flat.
• Which of the following is recommended when disassembling the Galaxy Note 8?
• Which statement is true about the relationship between PBA components on GS9/GS9+?
• Which cleaning solvent concentration is specified for disassembly?
• What torque force should be used when tightening screws on the GS9/GS9+?
• Before re-attaching the GS8 Back Glass, which tapes should be changed?
• Which jig should be used when disassembling the back glass from the GS9 and GS9+?
• What is the display size of the Galaxy Note 8?
• Which device has 4 screws on the Sub PBA?
• Which display technology is used by the Note 8's screen?
• Where should the main PBA removal start on the GS10, GS10+, and GS10e?
• Which equipment is used to remove the back glass on GS10/GS10+?
• What should be removed before beginning disassembly of the Note9?
• How many tapes are used to reassemble for S6 Edge +?
• The Galaxy Note 8 features a dual camera system with which configuration?
• How many connectors are on the Note 5 OCTA?
• What must be used on the Galaxy Note 5 to remove the OCTA?
• How many times does the Galaxy S9/S9+ need to be pressed using the press jig?
• Prior to Note 9 disassembly, which items must be removed?
• Which device's rear case uses 20 screws?
• Which device has a rear case with exactly 20 screws?
• What kind of alcohol is used during disassembly?
• What sequence should be used when removing the Rear Case from the Note 8?
• In the S9/S9+, the Sub PBA connects to the Main PBA via a Flex Cable.
• Which test mode is accessed with code *#0283#?
• Which statement about IP68 compliance for the Galaxy Note 8 is true?
• What is the torque tolerance for GS9/GS9+ screw tightening?
• Which statement best describes the torque specification for the Note8 rear screws?
• Which device uses 60°C heating for back glass disassembly when SOC is above 68%?
• How many pieces make up the Rear Assembly on the Galaxy Note9?
• How many screws are on the GS8's Sub PBA?
• Which device includes a specified Disassembly lower equipment step?
• After the Back glass is attached on the GS8, what is the required pressing force?
• You can reuse the Battery Tape when repairing a GS9.
• In repair procedures, what is the recommended practice after assembling a receiver?
• Which of the following components is NOT one which requires removal before the main PBA can be removed from the GS10, GS10+ and GS10e?
• The Rear Assembly on the Galaxy Note9 is composed of how many pieces?
• If a device fails to charge, which component may need replacement?
• On the GS10e, if the Receiver fails, which assembly will need to be replaced?
• Which device is described as Unibody in the material?
• Which device is the context of the S8/S8+ tape testing discussion?
• What is the torque value for tightening screws on the GS9/GS9+?
• Which device’s rear case uses 14 screws?
• To avoid DIP of the fingerprint sensor when detaching back glass on GS8, which side should be detached first?
• Which sequence is correct for attaching the Battery to the Note 8?
• On Galaxy S9/S9+, how long and at what force should it be pressed when using a pressure jig?
• To remove the Battery from a GS9, you should use:
• Which device variant is associated with a rear assembly that requires 16 screws?
• Which note model uses a bottom-to-top detachment sequence for its back glass?
• True or False: The GS8 Sub PBA can be replaced without OCTA disassembly.
• TRUE OR FALSE? The Galaxy S9/S9+ is IP67 water resistant?
• Which model's rear assembly screws are tightened to a specific torque according to the notes?
• True or False: An important management point is to visually inspect the Receiver after it is assembled.
• Where is the main antenna located on the GS10 and GS10+?
• What force should be used when performing the Battery press on the Note 8?
• If charging failure occurs, which component is most likely at fault and may need replacement?
• When heating a Galaxy Note 8 prior to Back Glass removal when the device has a SOC greater than 68% how long and at what temperature should it be heated when using an AOD jig?
• Do the Galaxy S9 and S9+ use all the same tapes?
• On the GS7 Edge, how many screws must be removed to take out the headphone jack?
• How many screws are on the Sub PBA for S6 Edge?
• True or False: the S-Pen cover can be reused if removed from the Note 8?
• Which option describes the action for IF Connector issue best?
• How many times does the Galaxy S9/S9+ need to be pressed by hand?
• Which of the following is a torque-related specification in the material?
• When pressing the Galaxy S9/S9+ with a Pressing Jig, what is the required force and duration?
• How many screws are in the Note 5 rear case?
• How many flex connectors are used to connect the main camera to the main PBA on the GS10, GS10+ and GS10e?
• Which device has 18 screws in the rear case?
• The Rear Assembly with 16 screws corresponds to which model?
• Which device model has the Rear Case secured by 16 screws?
• How should the Back Glass Tape be attached on the Galaxy S9/S9+?
• Which device family is discussed in relation to Back Glass tape and Island tapes during disassembly?
• The ESD Wrist Strap is tested with what frequency?
• Is OCTA disassembly required to replace the GS8 Sub PBA?
• On the Galaxy S9, how many screws are on the Sub PBA?
• What must be completed before and after repairing any mobile device?
• The sub keys cannot be removed without removing the OCTA on a S6 Edge. True or False?
• How many screws hold the Galaxy S10/S10+ Main PBA to the Bracket?
• If you disassemble a GS6 Flat to the OCTA, you must replace the CU tape.
• Which side of the back glass should be lifted first when manually disassembling the GS10/GS10+?
• How many screws are in the Note 8 rear case?
• An IP68 battery can be removed more than once.
• True/False: You can use any tape on the GS9 to perform Water Resistance Testing.
• Note 8 detachment: which order is recommended to detach the back glass?
• A Note 5 is not detecting the S-Pen, and it is determined to be a hardware fault Which part should be replaced?
• What key string can you use to view the device internal IMEI?
• For the GS10 series, the main PBA removal should commence at which edge?
• The Galaxy S10 family requires ESD precautions during repair.
• What is the recommended action when the Receiver fails on GS10e?
• The S-Pen on the Note 8 is IP68 compliant.
• Which device family requires four flex connectors on the Main PBA during reassembly?
• Battery SOC threshold for heating GS8 back glass disassembly at 60°C is greater than what percentage?
• When replacing the rear glass and OCTA on the GS7 Flat, how long must it be pressed for?
• Which device requires two absorbers during back glass removal?
• Which device is associated with the term Main PBA during assembly steps in the material?
• How many times can an IP68 battery be removed?
• The Galaxy S9/S9+ use all the same tapes as the Galaxy S8.
• On the Galaxy Note 8, should the SIM tray be removed before Back Glass disassembly?
• What is the correct key combination to enter download mode for Androids S7 and below?
• What part cannot be checked using *#0*#?
• TRUE OR FALSE? The home key CANNOT be removed from the GS6 Flat
• In the GS10 family, which component is mentioned first in the disassembly sequence?
• Which item must be removed before the Main PBA can be removed from the GS10e?
• If a Galaxy GS7 Edge does not wireless charge due to a hardware fault, which part should be replaced?
• Where should rear assembly removal start on the GS10 family?
• Which statement about the Main PBA attachment to the Note 8 is correct?
• TRUE OR FALSE? The Galaxy S10, S10+, and S10e do not require ESD precaution during repair.
• Before disassembly of the Note 9, which items should be removed?
• It is not important to remove the Back Glass and Island tapes from GS10, GS10+, and GS10e completely during disassembly.
• For the Galaxy Note 5, what is the term used to denote the rear dummy used during OCTA removal?
• From which edge should detachment begin on the Note 8 back glass?
• Which model is associated with the rear assembly screw count in the source material?
• What torque should be used when installing the GS8 screws?
• The Main PBA connectors count is five; which device is this attribute associated with?
• How many screws are on the Galaxy S9+ Rear Assembly?
• Which device is associated with the Automatic OCTA disassembly method?
• The Note 5 does NOT support a micro SD.
• What sequence should be used when removing the Main PBA from the Note 8?
• Which device's Sub PBA uses five screws?
• Which sequence is correct for removing the Sub PBA from the Note 8?
• Which of the following is an important management point when handling the front camera?
• Which device uses a pressing specification of 1 N for 1 Minute when using a Jig?
• Back glass tape should be applied on the back glass of the Note 5.
• Which device has a rear case comprised of three pieces?
• Where are the NFC and wireless charging coil located on the S10e?
• What is the correct assembly order for the GS10, GS10+, and GS10e?
• Which device requires two absorbers when removing its back glass?
• The GS6 Flat's home key can be removed.
• When removing the back glass of the Note 5, how many absorbers should be used?
• On the GS10, GS10+ and GS10e where should main PBA removal start?
• The Rear Assembly of GS10 family consists of how many parts?
• What is the torque setting for the screwdriver?
• How many screws are in the S6 Edge+ rear case?
• On a Note 8, the Back Glass Outside tape attaches to the __________.
• Before disassembly of the Note 9, which components should be removed?
• What type of device is the Galaxy S9/S9+?
• Where should back glass tape be applied for the Note 5?
• Which model requires two minutes of pressing when replacing rear glass and OCTA?
• Which statement is true about tape usage for GS9 and GS9+?
• When removing the back glass of the Note 5, how many absorbers should be used?
• Which part of the GS10, GS10+ and GS10e houses the most essential components of the device?
• Where is the main antenna located on the GS10 and GS10+?
• Which disassembly method is recommended when disassembling the Galaxy Note 8?
• After removing the back glass in GS10 family disassembly, what is the next component to remove?
• What sequence should be used when detaching back glass to the Note 8?
• How many screws hold the GS10, S10+ Main PBA to the bracket?
• For back glass disassembly on the GS8 with battery SOC greater than 68%, what are the heating conditions?
• Which starcode is used to access the water resistance test on Galaxy S9/S9+?
• True or False: Once either the battery or the receiver of the Galaxy Note 8 are removed, they cannot be reused.
• Which statement about the S-Pen cover is accurate according to the material?
• Where is the NFC and wireless charging coil located on the S10e?
• Back glass tape should be applied on the back glass of the Note 5.
• Which GS7 variant shares the rear-case screw count of 12 screws?
• The component most directly associated with S-Pen input detection on the Note 5 is the Digitizer.
• What is the Galaxy Note 8 battery capacity?
• Which component is inserted into the Bracket first when assembling the GS9/GS9+?
• If the IF Connector is defective on the GS10/GS10+ which action is correct?
• After the Back glass is attached on the GS8, how long should you press?
• Which device has only one screw securing the Main PBA?
• Which statement is true about handling the front camera?
• On a Note 8, where should the island tape be placed?
• What is the proper process for installing screws?
• How many screws are in the Rear Assembly on the Galaxy S9+?
• The Galaxy S9/S9+ has a Sub PBA that connects to the Main PBA via a Flex Cable.
• What must be used on the Note 5 to remove the OCTA?
• The Headset Jack on GS9/GS9+ is not part of the Sub PBA.
• Do the Galaxy S9 and Galaxy S9+ use all the same tapes?
• How many screws are in the GS7 Flat and GS7 Edge rear case?
• Which component is described for replacement in a hardware fault affecting wireless charging on Galaxy GS7 Edge?
• What is the recommended action when removing rear glass if the battery swells?
• Where is the back glass tape attached on the S6 Plus Edge?
• Disassembling a GS6 Flat to the OCTA requires CU tape replacement.
• Where is the Fingerprint Scanner located on the Galaxy Note9?
• How do you remove the rear glass when the battery is swollen?
• On which device do you not need to remove the OCTA to replace the SubPBA?
• Where are the NFC and wireless charging coil located on the GS10e?
• On the GS9, when do you disconnect the Fingerprint Sensor from the Main PBA?
• When removing the Sub PBA from the Note 8, what sequence should be used?
• Which sensor is typically involved in auto rotation issues?
• True or False; you can use alcohol to disassemble the GS9 Battery.
• What sequence should be used when attaching the Main PBA to the Note 8?
• For how long and with how much force should the device be pressed with to secure the battery and seal the tapes on the GS10, GS10+, and GS10e?
• Which models are associated with water resistance testing using WRT tapes?
• Should you cover the Fingerprint sensor when applying tapes for water resistance testing on the S8/S8+?
• The Galaxy S9/S9+ has a sub PBA that connects to the main PBA via a flex cable.
• Note 5 OCTA has two connectors.
• Which statement correctly describes the pressing specification for the Galaxy S9/S9+ pressing jig?
• What should be used to lift the battery from the GS10/GS10+?
• Which range correctly describes the GS8 back glass heating duration at 60°C?
• When detaching the GS8 back glass which side should be detached first?
• What sequence should be used when attaching the Main PBA to the Note 8?
• How many connectors are on the Note 5 OCTA?
• Which tape must be used for water resistance testing on the GS9?
• What sequence should be used when attaching the Battery to the Note 8?
• How long and at what force should a Battery be pressed after it is attached on a GS8?
• What sequence should be used when detaching the back glass from the Note 8?
• On the GS9 and GS9+, the Headset Jack is part of the Sub PBA.
• The GS8 Graphite Sheet is located on which piece of the Rear Case?
• On the GS9+, how many screws secure the Main PBA?
• How many screws are in the Galaxy S9 Rear Assembly?
• For the GS10 family, which component can be reused during a repair?
• Before re-attaching the GS8 Back Glass, which tapes should be changed?
• What is the correct disassembly order for GS10, GS10+, and GS10e?
• The Sub PBA screws on S6 Edge are how many?
• How many parts make up the Rear Assembly of the GS10, GS10+, and GS10e?
• On the GS7 Flat and GS7 Edge, how many pieces are there to the rear case?
• How often is the ESD Wrist Strap tested?
• Which side should be detached first on GS8 back glass to avoid DIP of the fingerprint sensor?
• How many screws secure the Rear Case of the Galaxy Note 8?
• On the GS10, GS10+, and GS10e, how many flex connectors must be attached to the Main PBA during reassembly?
• Which liquid is specified for removing the GS9 battery?
• How many screws are in the Note 5 rear case?
• Is the S-Pen on the Note 8 IP68 compliant?
• How many connectors are on the Main PBA on the GS9?